Zhejiang wanlai Intelligent electric co., ltd.
JCB1-125 Miniature Circuit Breaker 6kA/10kA
Short circuit and overload protection
Breaking capacity up to 10kA
With contact indicator
27mm module width
Available from 63A to 125A
1 Pole, 2 Pole, 3 Pole , 4 Pole are available
B , C or D curve
Comply with IEC 60898-1
Introduction:
JCB1-125 circuit breaker is designed to offer a high industrial performance level, it protects circuit against short circuit and overload current. 6kA/10kA breaking capacity makes it the perfect choice in commercial and heavy industrial applications.
JCB1-125 circuit breaker have been made from the highest grade components. This is to ensure reliability in all applications where protection against overload and short circuit is required.
JCB1-125 circuit breaker is a low voltage multistandard miniature circuit breaker (MCB), the rate current up to 125A. The frequency is 50Hz or 60Hz. The presence of green strip guarantees contact open physically and allows work to be carried out safely on the downstream circuit. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C
JCB1-125 circuit breaker has good overvoltage withstand capacity. It has an electrical endurance going up to 5000 cycles and a mechanical endurance going up to 20000 cycles.
JCB1-125 circuit breaker complete with 27mm pole width and ON/OFF indicators. it can be clipped on a 35mm DIN rail. It has a pin type busbar terminal connection
JCB1-125 circuit breaker comply with both industrial standard IEC 60898-1, EN60898-1, AS/NZS 60898 and residential standard IEC60947-2, EN60947-2, AS/NZS 60947-2
JCB1-125 circuit breaker is available in various breaking capacities, these breakers are the perfect choice for a wide variety of applications.
Product Description：
The most important features
● Short circuit and overload protection
● Breaking capacity：6kA, 10kA
● 27mm Width per Pole
● 35mm DIN Rail Mounting
● With contact indicator
● Available from 63A to 125A
● Rated impulse withstand voltage(1.2/50) Uimp: 4000V
● 1 Pole, 2 Pole, 3 Pole , 4 Pole are available
● Available in C and D Curve
● Comply with IEC 60898-1, EN60898-1, AS/NZS 60898 and residential standard IEC60947-2, EN60947-2, AS/NZS 60947-2
Technical Data
● Standard: IEC 60898-1, EN 60898-1, IEC60947-2, EN60947-2
● Rated current: \63A,80A,100A, 125A
● Rated working voltage: 110V, 230V /240~ (1P, 1P + N), 400~(3P,4P)
● Rated breaking capacity: 6kA,10kA
● Insulation voltage: 500V
● Rated impulse withstand voltage(1.2/50) : 4kV
● Thermo- magnetic release characteristic: C curve, D curve
● Mechanical life: 20,000 times
● Electrical life: 4000 times
● Protection degree: IP20
● Ambient temperature (with daily average ≤35℃)：-5℃~+40℃
● Contact position indicator: Green=OFF, Red=ON
● Terminal connection type:Cable/Pin-type busbar
● Mounting: On DIN rail EN 60715 ( 35mm) by means of fast clip device
● Recommended torque: 2.5N.m
| Standard | IEC/EN 60898-1 | IEC/EN 60947-2 | |
|
Electrical features |
Rated current In (A) | 1, 2, 3, 4, 6, 10, 16, | |
| 20, 25, 32, 40, 50, 63,80 | |||
| Poles | 1P, 1P+N, 2P, 3P, 3P+N, 4P | 1P, 2P, 3P, 4P | |
| Rated voltage Ue(V) | 230/400~240/415 | ||
| Insulation voltage Ui (V) | 500 | ||
| Rated frequency | 50/60Hz | ||
| Rated breaking capacity | 10 kA | ||
| Energy limiting class | 3 | ||
| Rated impulse withstand voltage(1.2/50) Uimp (V) | 4000 | ||
| Dielectric test voltage at ind. Freq. for 1 min (kV) | 2 | ||
| Pollution degree | 2 | ||
| Power loss per pole | Rated current (A) | ||
| 1, 2, 3, 4, 5, 6, 10,13, 16, 20, 25, 32,40, 50, 63, 80 | |||
| Thermo-magnetic release characteristic | B, C, D | 8-12In, 9.6-14.4In | |
|
Mechanical features |
Electrical life | 4, 000 | |
| Mechanical life | 20, 000 | ||
| Contact position indicator | Yes | ||
| Protection degree | IP20 | ||
| Reference temperature for setting of thermal element(℃) | 30 | ||
| Ambient temperature (with daily average ≤35℃) | -5...+40 | ||
| Storage temperation (℃) | -35...+70 | ||
| Installation | Terminal connection type | Cable/U-type busbar/Pin-type busbar | |
| Terminal size top/bottom for cable | 25mm2 / 18-4 AWG | ||
| Terminal size top/bottom for Busbar | 10mm2 / 18-8 AWG | ||
| Tightening torque | 2.5 N*m / 22 In-Ibs. | ||
| Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | ||
| Connection | From top and bottom | ||
|
Combination |
Auxiliary contact | Yes | |
| Shunt release | Yes | ||
| Under voltage release | Yes | ||
| Alarm contact | Yes | ||
Based on the Tripping Characteristics, MCBs are available in “B”, “C” and “D” curve to suit different applications.
“B” Curve - for protection of electrical circuits with equiptment that does not cause surge current (lighting and distribution circuits). Short circuit release is set to (3-5)In.
“C” Curve - for protection of electrical circuits with equiptment that causes surge current (inductive loads and motor circuit) Short circuit release is set to (5-10)In.
“D” Curve - for protection of electrical circuits which cause high inrush current, typically 12-15 times the thermal rated current (transformes, x-ray machines etc). Short circuit release is set to (10-20)In.
