JCR2-63 2 cirifka RCBO ee EV Charger 10kA kala duwanaanta wareegga wareegga 1P+N
JCR2-63 RCBOs (xakamaynta wareegtada hadda jirta ee leh ilaalinta culeyska xad dhaafka ah) waxay ku habboon yihiin qaybaha macaamiisha ama looxyada qaybinta, ee lagu dabaqo xaaladaha sida warshadaha, iyo ganacsiga, dhismayaasha dhaadheer iyo guryaha la dego.Ku habboon rakibidda EV
Kala-duwanaanta wareegga wareegga
Naqshad gaar ah oo loogu talagalay badbaadadaada!
Nooca Electromagnetic
Ilaalinta hadda jirta
Culays badan iyo ilaalinta wareegga gaaban
Awoodda jabinta 10kA
Hadda la qiimeeyay ilaa 63A (waxaa laga heli karaa 6A ilaa 63A)
Waxaa lagu heli karaa qalooca B ama C.
Dareenka socodka: 30mA, 100mA, 300mA
Nooca A ama Nooca AC waa la heli karaa
Gacan-qaad laba-laab ah (hal kontarool MCB, kontarool kale RCD)
U beddelashada tiir laba jibaaran si loo go'doomiyo wareegyada cilladaysan
Beddelka cirifka dhexdhexaadka ah wuxuu si weyn u yareeyaa rakibidda iyo wakhtiga tijaabada
U hoggaansan IEC 61009-1, EN61009-1
Hordhac:
Iyada oo ay sii kordhayso tirada guryaha la deggan yahay oo laga yaabo inay leeyihiin qulqulka cilladaha DC, noocayaga A JCR2-63 RCBO wuxuu ogaan karaa qulqulka cilladaha DC wuxuuna ka dhigi karaa korantada mid ammaan ah.Ku habboon rakibidda EVWaxay ku habboon tahay ilaalinta qaladka PME ama qaybta macaamiisha PEN LOSS.
JCR2-63 RCBOs waa hadhaaga wareeg ee hadda jira oo tayo sare leh iyo jebiye wareeg yar oo isku dhafan oo leh koronto-ku-tiirsanaan khadka ah iyo noocyo badan oo kala duwan oo la qiimeeyay hadda.Qalabka elektaroonigga ah ee ku dhex jira waxa uu si sax ah ula socdaa halka ay qulquluhu ku qulqulayaan.Farqiga u dhexeeya qulqulka haraaga ah ee aan waxyeello lahayn iyo kuwa halista ah waa la ogaan doonaa
JCR2-63 RCBO waa cabbir badbaado oo muhiim ah marka ay timaado ilaalinta wareegyada korantada.Waa aaladda hadda jirta, kaas oo si toos ah u cabbiri kara oo goyn kara wareegga mar kasta oo cilladi ka dhacdo wareegga ku xiran ama hadda uu ka bato dareenka la qiimeeyay.Lahaanshaha tignoolajiyada si toos ah looga gooyo wareegyada haddii ay dhacdo culeys xad dhaaf ah waxay xaqiijin doontaa ka hortagga burburka shabakadaada, iyo qalabka isticmaala.
JCR2-63 RCBO waxa lagu heli karaa Nooca A iyo Nooca AC.Nooca A wuxuu xaqiijiyaa qulqulka qulqulka haraaga ac iyo qulqulka dc ee garaaca.Ttype JCR2-61 RCBO waa nooc ka mid ah aaladaha ilaalinta badbaadada ee si weyn loogu isticmaalo dabaylaha EV.
Qiimaha hadda ee JCB2LE-80M ROBO waa ilaa 63A, oo laga heli karo 6A, 10A, 16A, 20A, 32A, 40A, 50A, 63A.Dareenka socodka ayaa lagu heli karaa 30mA, 100mA.Waxaa lagu heli karaa qalooca B ama C.
Nooca AC JCR2-63 RCBO waa adeegsi ujeedo guud, RCD waxay ogaan kartaa kana jawaabi kartaa hirarka sinusoidal AC.Sida caadiga ah loo isticmaalo dhammaan rakibaadaha la dego.
Nooca A JCR2-63 RCBO Waxaa loo isticmaali karaa ujeedo guud iyo qalabka lagu daro qaybaha elektiroonigga ah.RCD waxay ogaan kartaa oo uga falcelin kartaa sida Nooca AC iyo sidoo kale waxay dejin kartaa qaybaha garaaca wadnaha ee DC.
JCR2-63 RCBO waa isku darka RCD iyo MCB oo bixiya daadinta dhulka iyo ilaalinta joogtada ah ee hal qalab.Qalooca B waxaa loo qaabeeyey inuu ku wareego inta u dhaxaysa 3 ilaa 5 jeer wakhtiga buuxa ee xamuulka.C-curve waxa loo qaabeeyey in ay u dhexayso 5 ilaa 10 jeer wakhtiga culayska buuxa.B-curve guud ahaan waxay ku habboon yihiin codsiyada gudaha.Waxa kale oo laga yaabaa in loo isticmaalo codsiyada fudud ee ganacsiga halka beddelidda qalliinku yar yahay ama aan jirin.Qalabka C qalooca ayaa ah doorashada caadiga ah ee codsiyada ganacsiga iyo warshadaha halkaas oo la filayo in xoogaa koronto ah ay soo gaarto.
Sharaxaada Alaabta:
Tilmaamaha ugu muhiimsan
●Nooca Electromagnetic
●Ilaalinta daadinta dhulka
●Cilmiga xad dhaafka ah iyo ilaalinta wareegga gaaban
●Aan Khadka Lahayn / Xamuulka Xambaarsan
●Jebinta awoodda ilaa 10kA
● Hadda la qiimeeyay ilaa 63A (waxaa laga heli karaa 6A.10A,20A, 25A, 32A, 40A,50A, 63A)
●Waxa lagu heli karaa nooca B, nooca C qalooca.
●Dareenka socodka: 30mA,100mA,300mA
●Waxa lagu heli karaa Nooca A ama Nooca AC
●Runtii ka goynta cirifka labanlaaban ee Module RCBO
●Waxay jaraysaa kirishbooyada LIVE & dhexdhexaadka ah labadaba xaalada hadda jirta iyo culeyska xad dhaafka ah
●Beddelida cirifka dhexdhexaadka ah waxay si weyn u yaraynaysaa rakibidda iyo wakhtiga tijaabada
● 35mm DIN tareen ku dhejinta
●Dabacsanaanta rakibaadda oo leh doorashada isku xirka khadka ama kor ama hoos
●La jaanqaadi kara noocyo kala duwan oo kaashawiito ah oo leh boolal madax oo isku dhafan
●Waxay la kulmeysaa ESV Shuruudaha Tijaabada Dheeraadka ah & Xaqiijinta ee RCBO-yada
●Waxay raacaysaa IEC 61009-1, EN61009-1
Xogta Farsamada
●Heerka: IEC 61009-1, EN61009-1
●Nooca: Electromagnetic
●Nooca (qaabka mawjada dhulka ee daadanaya ayaa la dareemay): A ama AC ayaa diyaar ah
●Tiirarka: 2 tiir, 1P+N
●qiimaynta hadda:6A, 10A, 16A, 20A, 25A, 32A, 40A 50A, 63A
●Laanta shaqada lagu qiimeeyay: 110V, 230V, 240V ~ (1P + N)
Dareenka la qiimeeyay I△n: 30mA, 100mA, 300mA
●Awoodda jabinta la qiimeeyay: 10kA
●Awoodda dahaarka: 500V
● Inta jeer ee la qiimeeyay: 50/60Hz
●Dareenka la qiimeeyay ee u adkaysta (1.2/50): 6kV
● Darajada wasakhowga:2
●Sifada sii daynta thermo-magnetic: qalooca B, qalooca C, qalooca D
●Nolosha makaanikada: 10,000 jeer
●Nolol koronto: 2000 jeer
●Deejada ilaalinta: IP20
● heerkulka deegaanka (oo leh celcelis maalinle ah ≤35℃):-5℃~+40℃
●Tusaha booska xiriirka: Cagaar=OFF, Casaan=ON
●Nooca isku xirka Terminalka:Cable/U-nooca baska/buska nooca pin-nooca
● Koritaanka: Dusha tareenka DIN EN 60715 (35mm) iyadoo la adeegsanayo qalab degdeg ah
●Xirgaha lagu taliyay: 2.5Nm
●Xiriirka: Kor ama hoos ayaa la heli karaa
Heerka | IEC61009-1, EN61009-1 | |
Koronto Astaamaha | Hadda lagu qiimeeyay gudaha (A) | 6, 10, 16, 20, 25, 32, 40,50,63 |
Nooca | Electromagnetic | |
Nooca (qaab mowjad ah oo ka soo daadanaya dhulka ayaa la dareemay) | A ama AC ayaa diyaar ah | |
Tiirarka | 2 cirif | |
Danab lagu qiimeeyay Ue(V) | 230/240 | |
Dareenka la qiimeeyay I△n | 30mA,100mA,300mA ayaa diyaar ah | |
Korontada dahaarka Ui (V) | 500 | |
Inta jeer ee la qiimeeyay | 50/60Hz | |
Lagu qiimeeyay awooda jabinta | 10kA | |
Dareenka la qiimeeyay ee u adkeysanaya danabka(1.2/50) Uimp (V) | 6000 | |
Waqtiga nasashada ee hoos yimaada I△n (s) | ≤0.1 | |
shahaadada wasakhowga | 2 | |
Sifada sii daynta Thermo-magnetic | B, C | |
Makaanik Astaamaha | Nolosha korontada | 2,000 |
Nolosha makaanikada | 2,000 | |
Tilmaamaha booska xiriirka | Haa | |
shahaadada ilaalinta | IP20 | |
Heerkulka tixraaca ee dejinta curiyaha kulaylka (℃) | 30 | |
Heerkulka deegaanka (oo leh celcelis maalinle ah ≤35℃) | -5...+40 | |
Heerkulka kaydinta (℃) | -25...+70 | |
Rakibaadda | Nooca isku xirka Terminalka | Cable/U-nooca baska/Baska nooca pin-ka ah |
Cabbirka meesha sare/hoose ee fiilada | 25mm2 / 18-3 AWG | |
Cabbirka meesha sare/hoose ee Busbar | 10mm2 / 18-8 AWG | |
Qulqulka adkeynaya | 2.5 N*m / 22 In-Ibs. | |
Koritaanka | DIN tareenada EN 60715 (35mm) iyadoo la adeegsanayo qalab degdeg ah | |
Isku xirka | Laga soo bilaabo kor ama hoos |
JCR2-63 Cabbirrada
RCD-yada miyaa looga baahan yahay inay keenaan dab-jare baabuur?
Haa, qaanuunka 722.531.3 wuxuu u baahan yahay in RCD (Max 30mA) uu bixiyo dajiyaha baabuurka RCDna waa in ay gooyaan dhammaan kirishbooyada nool.Tan waxaa ku jira Dhexdhexaadnimada sidaa darteed RCBO-yada hal tiir ah waa inaan loo isticmaalin codsigan.
Qaar ka mid ah soosaarayaasha dabaylaha baabuurta ayaa soo xiganaya RDC-DD, waa maxay tani?
RDC-DD waa 'Hadhaaga Tooska ah hadda - Aaladda Goynta'.Tan waxaa badanaa lagu dhex dhisaa qalabka dabaylaha baabuurka si loola socdo oo haddii loo baahdo la gooyo haddii wax dhibaato ah oo DC ah ay ka soo baxaan dhinaca AC ee rakibidda, taas oo saameyn karta hawlgalka RCDs
Haddii dabaylaha baabuurku aanu lahayn wax RDC-DD markaa waa maxay nooca RCD ayaa loo baahan yahay?
Haddii dabaylaha baabuurku aanu lahayn wax RDC-DD ah markaa waxaad u baahan doontaa Nooca B RCD oo siinaya xeedho baabuurka.Tani waa sababta oo ah Nooca B wuxuu ogaan karaa DC-gan, wali wuu shaqeeyaa oo wuu jari karaa haddii loo baahdo.
Haddii dabaylaha baabuurku aanu lahayn wax RDC-DD markaa waa maxay nooca RCD ayaa loo baahan yahay?
Haddii dabaylaha baabuurku aanu lahayn wax RDC-DD ah markaa waxaad u baahan doontaa Nooca B RCD oo siinaya xeedho baabuurka.Tani waa sababta oo ah Nooca B wuxuu ogaan karaa DC-gan, wali wuu shaqeeyaa oo wuu jari karaa haddii loo baahdo.
Waa maxay nooca RCD waa in la isticmaalo haddii dabaylaha baabuurku leeyahay RCD-DD kaas oo ogaan doona oo ka saari doona wax kasta oo DC ah oo ka sarreeya 6mA?
Xaaladdan oo kale, nooca A RCD waa la isticmaali karaa.Tani waa sababta oo ah Nooca A ayaa wali si sax ah u shaqeyn kara ilaa heer 6mA DC ah.Si kastaba ha ahaatee, in ka badan 6mA, qalabkan Nooca-A ah ayaa laga yaabaa inuu saameeyo oo ay suurtogal tahay inuu indho-tiro oo ay suurtagal tahay inuu joojiyo shaqada.Tani waa doorashada la door bidayo maadaama Nooca A ay hadda yihiin kuwo aad u badan oo qiimaha ugu hooseeya.Sidaa darteed inta badan soosaarayaasha xajiyeyaasha baabuurta waxay leeyihiin 6mA RDC-DD oo ku dhex dhisan.
RCD oo taxane ah:
Xaaladaha qaarkood, qof ayaa laga yaabaa inuu ka keeno dajiyaha baabuurka rakibaadda jira halkaas oo laga yaabo inay ka fikiraan ku rakibida habka firaaqada ah ee qaybta macaamiisha.Haddii aysan jirin meel bannaan oo loogu talagalay Nooca A cusub ee RCD, waxaa laga yaabaa inay ka fekeraan ku rakibida tan u dhow dabaysha baabuurka.
Nooca A RCD ma saameyn doono DC ilaa 6mA.Si kastaba ha ahaatee, waxaa muhiim ah in la tixgeliyo waqtiga xaddidan ee RCD lagu rakibay qaybta macaamiisha.Haddii la rakibay wakhti ka hor, waxay noqon kartaa Nooca AC.RCD-kan waxa kale oo laga yaabaa in uu keeno wareegyo kale oo guriga dhexdiisa ah kuwaas oo markaas saamayn ku yeelan kara ama mararka qaarkood uu indho beelay mid kasta oo DC-gan oo laga yaabo inuu ka soo baxo baabuurka.Wareegyadan kale ayaa markaa laga yaabaa inaysan lahayn wax ilaalin ah oo hadda jira, cawaaqibkeeduna waxay noqon karaan kuwo daran.