JCSD-60 Sesebelisoa sa ts'ireletso ea Surge 30 / 60kA Surge Arrestor
Lisebelisoa tsa ts'ireletso ea surge (SPDs) ke likarolo tsa bohlokoa tsa sistimi efe kapa efe ea motlakase e thusang ho sireletsa lisebelisoa ho tsoa likotsing tsa motlakase tse bakoang ke ho otla ha lehalima, ho tima ha motlakase kapa litšitiso tse ling tsa motlakase.Li-SPD tsa JCSD-60 li etselitsoe ho khelosa motlakase o feteletseng hole le lisebelisoa tse bobebe, ho fokotsa kotsi ea ho senyeha kapa ho hloleha.
Selelekela:
Lisebelisoa tsa ts'ireletso ea JCSD-60 Surge li etselitsoe ho monya le ho qhala matla a mangata a motlakase a bakoang ke ho phahama ha matla, ho netefatsa hore lisebelisoa tse hokahaneng le sistimi ha li senyehe.JCSD-60 SPDs e ka thusa ho thibela ho theoha ha thepa e theko e boima, ho lokisoa le ho nkeloa sebaka.
Li-surge tsa JCSD-60 li etselitsoe ho monya le ho senya matla a mangata a motlakase a bakoang ke ho phahama ha matla, ho etsa bonnete ba hore lisebelisoa tse amanang le tsamaiso ha li senyehe.Li-SPD tsena li ka thusa ho thibela ho theoha ha thepa e theko e boima, ho lokisoa le ho nkeloa sebaka.Lisebelisoa li boetse li etselitsoe hore ho be bonolo ho li kenya le ho li hlokomela.
JCSD-60 Spds e tšoauoa ka bokhoni ba eona ba ho ntša metsi ka mokhoa o sireletsehileng ka 8/20 µs wave form.T2 le T2 + 3 SPDs li fumaneha ka mefuta e fapaneng ea lipalo tse ngata bakeng sa litsamaiso tsohle tsa kabo.
Sesebelisoa sa rona sa ts'ireletso sa JCSD-60 surge se hahiloe ka theknoloji ea morao-rao le moralo o boreleli, oa sejoale-joale o tla kopana hantle le sistimi efe kapa efe ea motlakase.Ke DIN-rail mountable, e etsang hore ho be bonolo ho e kenya le ho e sebelisa maemong a fapaneng.
E 'ngoe ea likarolo tsa bohlokoahali tsa sesebelisoa sa rona sa ts'ireletso ea surge ke ho tsoa ka lebitso hona joale ka 30kA (8/20 µs) ka tsela.Sena se bolela hore e ka mamella maemo a phahameng a ho phahama ha motlakase ntle le ho baka kotsi ho lisebelisoa tsa hau.Ho feta moo, Imax 60kA (8/20 µs) ea eona e phahameng ea ho ntša metsi e e etsa sesebelisoa se matla sa ho thibela tšenyo e bakiloeng ke ho buuoa.
Sesebelisoa sa rona sa ts'ireletso sa JCSD-60 Surge se entsoe ka mokhoa oa ergonomically ho netefatsa tšireletso e phahameng bakeng sa lisebelisoa tsohle tsa hau tsa elektroniki.E entsoe ka thepa ea boleng bo holimo 'me e lekoa ka hloko ho netefatsa hore e khona ho mamella ho phahama hofe kapa hofe ha matla.
Tlhaloso ea Sehlahisoa:
Likarolo tse ka Sehloohong
● E fumaneha ho 1 Pole ,2P+N ,3 Pole,4 Pole, 3P+N
● MOV kapa MOV + GSG Technology
● Ho ntša metsi ka lebitso Ka 30kA (8/20 µs) ka tsela e 'ngoe
● Boholo ba tšebeliso ea hona joale Imax 60kA (8/20 µs)
● Moralo oa mojule oa plug-in o nang le sesupo sa boemo
● Ponahalo e Bonahalang: Botala=Ho lokile, Bokhubelu=Emela
● Ho ikhethela Letshwao la Remoutu
● Din Rail Mounted
● Li-module tse ling tse ka kenngoang
● E loketse litsamaiso tsa TN, TNC-S, TNC le TT
● E lumellana le IEC61643-11 & EN 61643-11
Lintlha tsa Tekheniki
● Mofuta oa 2
● Marang-rang, 230 V mohato o le mong, 400 V 3-mohato
● Max.Matla a sebetsang a AC: 275V
● Temporary Over Voltage (TOV) Charasteristics - 5 sec.UT: 335 Vac e mamella
● Temporary Over Voltage (TOV) Charasteristics - 120 mn UT: 440 Vac disconnection
● Nominal discharge current In: 30 kA
● Max.Tlhahiso ea hajoale: 60kA
● Kakaretso ea Maximum ho qhala hona joale Imax kakaretso: 80kA
● Ho mamella ka Combination waveform IEC 61643-11 Uoc: 6kV
● Boemo ba tšireletso Holimo: 1.8kV
● Boemo ba tšireletso N/PE ho 5 kA :0.7 kV
● Matla a setseng L/PE ho 5 kA: 0.7 kV
● Hona joale e amohelehang ea nako e khutšoanyane: 25kA
● Khokahano ho Netweke:Ka li-terminals tsa screw: 2.5-25 mm²
● Ho phahamisa: Symmetrical rail 35 mm (DIN 60715)
● Mocheso oa ho sebetsa: -40 / +85°C
● Tekanyetso ea tšireletso: IP20
● Failsafe Mode: Kgaollo ho tswa ho netweke ya AC
● Letšoao la ho khaoha: Letšoao la mochine oa 1 ka palo - Bofubelu / Botala
● Li-Fuse: 50 A mininyane.- 125 A max.- Mofuta oa Fuse gG
● Ho lumellana ha maemo: IEC 61643-11 / EN 61643-11
Thekenoloji | MOV, MOV+GSG lia fumaneha |
Mofuta | Mofuta oa 2 |
Marang-rang | 230 V mohato o le mong 400 V 3-mohato |
Max.Matla a sebetsang a AC Uc | 275V |
Temporary Over Voltage (TOV) Charasteristics - 5 sec.UT | 335 Vac e mamella |
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT | 440 Ho khaoha ha Vac |
Nominal discharge current In | 30 kA |
Max.lahla Imax ea hajoale | 60kA |
E mamella ho Combination waveform IEC 61643-11 Uoc | 6kV |
Tshireletso boemo Hodimo | 1.8kV |
Boemo ba tšireletso N/PE ho 5 kA | 0.7 kV |
Matla a setseng L/PE ho 5 kA | 0.7 kV |
Mokotla o amohelehang oa nako e khuts'oane | 25kA |
Khokahano ho Netweke | Ka li-terminals tsa screw: 2.5-25 mm² |
Ho phahamisa | Symmetrical terene 35 mm (DIN 60715) |
Mocheso oa ho sebetsa | -40 / +85°C |
Tekanyetso ea ts'ireletso | IP20 |
Failsafe mode | Ho khaola marang-rang a AC |
Sesupo sa ho khaoha | Letšoao la 1 la mochini ka palo - Bofubelu / Botala |
Li-fuse | 50 e nyane.- 125 A max.- Mofuta oa Fuse gG |
Ho latela litekanyetso | IEC 61643-11 / EN 61643-11 |
Mofuta oa 1
SPD e ka ntšang lehalima le sa fellang
ka sebopeho se tloaelehileng sa maqhubu 10/350 μs (teko ea Sehlopha sa I).Hangata e sebelisa theknoloji ea spark gap.
Mofuta oa 2
SPD e ka thibelang ho ata ha overvoltages mecheng ea motlakase le ho sireletsa lisebelisoa tse hokahaneng le eona.Hangata e sebelisa theknoloji ea metal oxide varistor (MOV) 'me e tšoauoa ka leqhubu la hona joale la 8/20 μs (teko ea Sehlopha sa II)
Mofuta - Lisebelisoa tsa ts'ireletso ea surge li arotsoe ka mefuta ho latela bokhoni ba tsona ba ho tsoa.Lentsoe "Class" le boetse le sebelisoa hangata.
Iimp - Impulse current ya 10/350 μs waveform
e amanang le mofuta oa 1 SPD's
Ho - Ho phahama hona joale ha 8/20 μs waveform
e amanang le mofuta oa 2 SPD's
Holimo - Matla a setseng a lekantsoeng ka bophara
terminal ea SPD ha In e sebelisoa
Uc - Matla a phahameng a matla a ka bang teng
e sebelisoa khafetsa ho SPD ntle le hore e tsamaee.